CHLQC - ELMER'S CERAMIC TILE ADHESIVE-LATEX, E896

  • MSDS: CHLQC
  • Manufacturer: BORDEN INC
  • Product Name: ELMER'S CERAMIC TILE ADHESIVE-LATEX, E896
  • National Stock Number: 8040-00N087967
Product Identification

Product ID:ELMER'S CERAMIC TILE ADHESIVE-LATEX, E896
MSDS Date:06/23/1993
FSC:8040
NIIN:00N087967
MSDS Number: CHLQC

Responsible Party
BORDEN INC
180 EAST BROAD ST
COLUMBUST, OH 43215
US

Emergency Phone: 614-431-6600

Info Phone: 614-831-6680

Cage: 07982

Contractor
BORDEN INC
208 COLUMBUS, OH 43215-3705 US

Telephone: 614-225-6124

Cage: 07982

Ingredients

FORMALDEHYDE (SARA 302/313) (CERCLA)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: <0.1%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM, A2

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


ETHYLENE GLYCOL (SARA 313) (CERCLA)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 1-5%

ACGIH TLV: C 50 PPM, VAPOR

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 30-50%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST


VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 5-10%

OSHA PEL 300 PPM

ACGIH TLV: 300 PPM


ROSIN; (ROSIN ACID)

CAS: 8050-09-7

RTECS: VL0480000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K


VM & P NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K


& HLTH AND THAT ODOR THRESHOLD FOR FORMALDEHYDE IS

RTECS: 9999999ZZ


0.3 PPM(0.37 MG/M3)

RTECS: 9999999ZZ


77-126.

RTECS: 9999999ZZ


HAZARD. MAY CAUSE REPROD DISORDERS BASED ON FEEDING

RTECS: 9999999ZZ


CAN CAUSE CNS DEPRESS. SIGNS & SYMPS MAY INCL HDCH,

RTECS: 9999999ZZ


CAUSE SEV, ACUTE KIDNEY DMG WHICH MAY BE FATAL. SEE

RTECS: 9999999ZZ


50 PPM (125 MG/M3) CEILING.

RTECS: 9999999ZZ


PARTICULATES,

RTECS: 9999999ZZ


OSHA PEL. CAN CAUSE CNS DEPRESS. SIGNS & SYMPS MAY

RTECS: 9999999ZZ


300 PPM (1370 MG/M3) TWA.

RTECS: 9999999ZZ

OSHA PEL 300 PPM (1350 MG/M3) TWA; 400 PPM(1800 MG/M3)(ING


MAY CAUSE ALLERGIC SKIN RXN. SEE

RTECS: 9999999ZZ


ALIPHATIC SOLVENT NAPHTHA (PETROLEUM). CAN CAUSE

RTECS: 9999999ZZ


VOMIT, UNCON & EVEN ASPHY. SEE FOOTNOTE C. ACIGH

RTECS: 9999999ZZ


TOXIC DERMALLY WHEN TESTED AS DESCRIBED IN 16 CFR

RTECS: 9999999ZZ


WHEN TESTED AS DESCRIBED IN 16 CFR PART 1500.3 (C)

RTECS: 9999999ZZ


AIRBORNE, MAY CAUSE IRRIT OF NOSE, THROAT, & LUNGS.

RTECS: 9999999ZZ


IRRITATING. FOR MORE SPECIFIC INFORMATION CONT NEHC

RTECS: 9999999ZZ


OCCUP SAFETY & HLTH ADMINISTRATION 29 CFR PART

RTECS: 9999999ZZ


SHOULD BE PROVIDED TO KEEP AIR CONTAMINANT

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGREDS LISTED HAVE BEEN ASSOC W/1 OR
MORE OF LISTED IMMED AND/OR DELAYED(*) HLTH HAZARDS. RISK OF DMG &
EFTS DEPENDS UPON DURATION & LEVEL OF EXPOSURE. BEFORE USING/HNDLG,
READ & UNDERSTAND MSDS. ACU TE: FORMALDEHYDE: POTNTL CANCER HAZ.
RATS CHRONICALLY EXPOSED TO 14 PPM FORMALDEHYDE CONTRACTED NASAL
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CANCERS. BASED ON ANIMAL DATA &
LIMITED EPIDEMIOLOGICAL EVID, NTP & IARC HAVE LISTED FORMALDEHYDE
AS PROBABLE HUMAN CARCIN. OSHA REGULATES FORMALDEHYDE AS POTNTL
HUMAN CARCIN. MAY CAUSE ALLE RGIC SKIN RXN. SOME RPTS SUGGEST THAT
FORMALDEHYDE MAY CAUSE RESP SENSITIZ, SUCH AS ASTHMA, & THAT
PREEXISTING (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN: FLUSH W/COPIOUS AMTS OF WATER. CALL MD. . INGEST: IF
ACCIDENTLY SWALLOWED, DILUTE BY DRINKING LG QTYS OF WATER. IMMED
CONT POIS CTL CTR OR HOSPITAL EMER ROOM FOR ANY OTHER ADDNL
TREATMENT DIRECTIONS. INHAL: REMOVE TO FRESH AIR.EYE CONT: IMMED
FLUSH W/PLENTY OF WATER FOR AT LST 15 MINS. CALL PHYS IF IRRIT
PERSISTS.

Fire Fighting

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:NIOSH APPROVED SCBA & FULL PROT EQUIP . WILL
NOT BURN UNLESS WATER HAS EVAPORATED. IN CASE OF FIRE, WATER SHOULD
BE USED TO KEEP FIRE-EXPOSED CNTNRS COOL.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:SWEEP (SCOOP) UP AND REMOVE TO A CHEMICAL
DISPOSAL AREA. PREVENT ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY PLACE. KEEP CNTNRS
TIGHTLY CLSD. STORE <100F. INHAL: AVOID PRLNGD/RPTD BRTHG OF VAP.
EYES: AVOID PRLNGD/RPTD CONT W/EYES.
Other Precautions:HNDL I/A/W GOOD INDUST HYGIENE & SFTY PRACTICES.
THESE PRACTICES INCL AVOIDING UNNEC EXPOS & REMOVAL OF MATL FROM
EYES, SKIN & CLTHG. CAUTION! THIS MATL PRESENTS POSS HLTH HAZS AS
DETERM WHEN REVIEWED ACCORDING TO REQUIREMENTS OF (ING 20)

Exposure Controls

Respiratory Protection:WHERE AIR CONTAMINANTS CAN EXCEED ACCEPTABLE
CRITERIA, USE NIOSH APPRVD RESP PROT EQUIP. RESPS SHOULD BE
SELECTED BASED ON FORM & CONC OF CONTAMINANTS IN AIR I/A/W OSHA 29
CFR 1910.134/OTHER APPLICABL E STANDARDS OR GUIDELINES.
Ventilation:IF AIRBORNE CONTAMINANTS ARE GENERATED WHEN MATL IS
HEATED/HNDLD, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS (ING 23)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
PH @ 25C: 9.3. EFTS OF OVEREXP: RESP & SKIN DISORDERS MAY BE AGGRAVATED
BY EXPOS. OSHA HAS IDENTIFIED 0.5 PPM AS "ACTION LEVEL" 29 CFR
1910.1048. PLEASE REFER TO OSHA STD FOR GUIDANCE APPLIC TO YOUR S
PECIFIC OPERATIONS. OSHA HAS STATED THAT CONC OF 100 PPM IS IMMED
DANGEROUS TO LIFE(ING 7)

Chemical Properties

Boiling Pt:B.P. Text:275F,135C
Melt/Freeze Pt:M.P/F.P Text:32.0F,0.0C
Vapor Density:>1
Spec Gravity:1.16
pH:SUPDAT
Evaporation Rate & Reference:<1 (ETHER =1)
Solubility in Water:DISPERSIBLE
Appearance and Odor:SMOOTH SYRUP. MILD ODOR.
Percent Volatiles by Volume:53

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALINE MATERIALS.
Stability Condition to Avoid:NORMALLY STABLE AS DEFINED IN NFPA
704-12(4-3.1).
Hazardous Decomposition Products:CO, CO*2.

Disposal

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE/PROVINCIAL,
AND FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.